Parking Lot | Garage | Commercial LED Lighting Power Supply
|
Input Specifications |
Operating voltage range 90 to 305 Vac
Frequency Range 47 –
63 Hz
Power factor >90% @
>1A output
Harmonics (THD) <20%
@ >1A output
Input current <0.7A @ 277Vac
(full load)
Inrush current <40A
Leakage current <3mA
@ 230Vac
Conducted emission
compliant to EN55022 CISPR22 Class A
Input Protection: 4A input fuse
|
|
General Specifications |
Switching frequency 120 kHz typ.
Efficiency >90% typ.
Maximum load 100
Watts
Thermal shutdown
Tsensor >105°C
Conduction cooling, through the
aluminum case and baseplate |
|
Output Specifications |
Output Voltage+48
Vdc nominal, ±1 Vdc
Regulation +10%
maximum not to exceed 60Vdc in any case from minimum load to maximum load or
vice-versa and low to high line or vice-versa.
Current range 0.21
to 2.1 A.
Over current
Shutdown 3.3 A (No damage) with automatic restart.
Switching voltage
ripple <200mV p-p and noise.
Ripple at 120 Hz 5V
p-p.
Output overvoltage
<60Vdc.
Input / output
isolation 3,000Vac.
Input / case
isolation 1,500Vac.
Output/ case
isolation 500 Vac.
Full power capability over full
range of AC input and baseplate (Tbp) up to 70ºC (Output must be <1.8A when
Vac<100Vac and Tbp >60ºC) |
|
Environmental Specifications |
Operating ambient
temperature range -40°C to +70°C.
Storage temperature
range –40C to +85C case.
Operating relative
humidity 0 to 95% non-condensing.
Non-operating
relative humidity 0 to 95% non-condensing.
Altitude, operating:
up to 10,000 ft above sea level.
Mechanical Sine
Wave/Vibration: 10-55 Hz, 0.2 G peak, 3 axes without performance
degradation.
RoHS6. |
|
Qualifications |
Calculated MTBF
>200,000 hrs calculated per Mil-HDBK-217 GB at ambient temperature of 45°C
Design lifetime >14
years assuming operating average of 12 hours per day.
Warranty 5 years
after shipping date.
Safety approvals: certified to
meet UL 60950-1, EN60950-1, and CSA22.2 #950-M90. |
|
Construction |
Case and baseplate Aluminum,
corrosion-resistant. Use inside IP-rated enclosure for outdoor use. This
unit is designed to be attached directly to a metal case that will sink heat
out of the enclosure. |
|
Efficiency Curve (click to
enlarge view)
|
Power Factor (Click to enlarge
view)
|
|
|
close
Phillips LumiLEDs are 20% brighter than before with same power consumption and thermal characteristics. Our Light Engines are integrated with these new products offering 20% increase in Lumens than currently certified and listed here on our website. Please contact Green Machine for more information or see the Phillips Press release by clicking here
|